NOIR A LA CHAUX

New product

technical characteristics :

Chemical name: synthetic black iron oxide

Color Index: Bk11

Case Number: 471-34-1

apparent density: 980 g / l

UV resistance: good

coloring power: good

More details

1,10 €

- +

Despite the greatest care taken in color reproduction, they may differ from the actual colors of the product for technical reasons

 
More info

Use: lime, wax, paint, plaster, fresco, glaze, cement, fine arts.
This pigment is powder. For use in Artistic painting, it should be finely ground in a mortar before mixing with the binder.

Noir à la chaux with oil

(Noir à la chaux with oil)

Flaxseed oil: Dilute the powder in a little turpentine before adding it to linseed oil.
paint with water / lime paste: dilute the pigment in a little water to make it liquid before incorporating it into the paint.
lime powder / cement / plaster: directly incorporate the pigment (up to 5% based on the weight of the binder), then mix in order to stain all of your binder.

Noir à la chaux with lime

Photo on the left:  pigment is mixed in the badisof plus (limewash ready to use, which you can find in our decorative range) at the rate of 5% or 50 g of pigment per kilo of whitewash. Right picture: the pigment is mixed in the badisof plus 20% pigment or 200 g per kilo of whitewash.

These renderings can be similar for any white base mixed with this pigment. However, differences will be possible for the use of paints more or less loaded with titanium dioxide (white pigment), which will give a final color more or less clear.

If you want to lighten a pigment, before coloring a transparent binder (linseed oil, wax, acrylic binder, caparol, flour ...), you can mix it with white tiona.

Color: black pulling slightly on the brown with a transparent binder. Fairly warm gray, warm, with a white binder.

This pigment is 80% natural.

 made in France.

History: pigment preparation prepared by ocres deFrance.

Our packaging:

We use recyclable PET jars, disposable, clean in the yellow bins.

Write a review

NOIR A LA CHAUX

technical characteristics :

Chemical name: synthetic black iron oxide

Color Index: Bk11

Case Number: 471-34-1

apparent density: 980 g / l

UV resistance: good

coloring power: good

Write a review

7 other products in the same category:

Customers who bought this product also bought:

Menu