ABRICOT

New product

technical characteristics :

Chemical name: mixture of synthetic iron oxides

Color Index: R101 - Y42

apparent density: 670 g / l

UV resistance: very good

coloring power: medium

More details

1,07 €

- +

Despite the greatest care taken in color reproduction, they may differ from the actual colors of the product for technical reasons

 
More info

Use: lime, wax, paint, plaster, fresco, glaze, cement, fine arts.
This pigment is powder. For use in Artistic painting, it should be finely ground in a mortar before mixing with the binder.
Flaxseed oil: Dilute the powder in a little turpentine before adding it to linseed oil.
paint with water / lime paste: dilute the pigment in a little water to make it liquid before incorporating it into the paint.
lime powder / cement / plaster: incorporate the pigment directly, then mix in order to stain all of your binder.

recommended dosage: The maximum dosage is 10% relative to the binder used. Above 10%, it is recommended to incorporate fixers and adjuvants (use lime).

Photo on the left:  pigment is mixed in the badisof plus (limewash ready to use, which you can find in our decorative range) at the rate of 5% or 50 g of pigment per kilo of whitewash. Right picture: the pigment is mixed in the badisof plus 20% pigment or 200 g per kilo of whitewash.

These renderings can be similar for any white base mixed with this pigment. However, differences will be possible for the use of paints more or less loaded with titanium dioxide (white pigment), which will give a final color more or less clear.

If you want to lighten a pigment, before coloring a transparent binder (linseed oil, wax, acrylic binder, caparol, flour ...), you can mix it with white tiona.

Color: light orange, bright with a transparent binder - very soft orange with a white binder

This pigment is 95% natural, safe for humans and the environment, under the mentioned conditions of use.

made in France

Pigment preparation designed by Ste des Ocres de France in 1998, characterized by a great fineness of matter.

Write a review

ABRICOT

technical characteristics :

Chemical name: mixture of synthetic iron oxides

Color Index: R101 - Y42

apparent density: 670 g / l

UV resistance: very good

coloring power: medium

Write a review

5 other products in the same category:

Customers who bought this product also bought:

Menu