OMBRE DE CHYPRE CCCN

New product

technical characteristics :

chemical name: iron oxide, clay silicates

Color index: Br7

apparent density: 758 g / l

UV resistance: very good

coloring power: very good

More details

1,31 €

- +

Despite the greatest care taken in color reproduction, they may differ from the actual colors of the product for technical reasons

 
More info

Use: lime, wax, paint, plaster, fresco, glaze, cement, fine arts, flour painting.

This pigment is powder. For use in Artistic painting, it should be finely ground in a mortar before mixing with the binder.

Ombre de Chypre CCCN

(Ombre de Chypre CCCN with oil)

Flaxseed oil: Dilute the powder in a little turpentine before adding it to linseed oil.
paint with water / lime paste: dilute the pigment in a little water to make it liquid before incorporating it into the paint.
lime powder / cement / plaster: incorporate the pigment directly, then mix in order to stain all of your binder.

Ombre de Chypre CCCN with lime

The maximum dosage is 10% relative to the binder used. Above 10%, it is recommended to incorporate fixatives and adjuvants.

Photo on the left:  pigment is mixed in the badisof plus (limewash ready to use, which you can find in our decorative range) at the rate of 5% or 50 g of pigment per kilo of whitewash. Right picture: the pigment is mixed in the badisof plus 20% pigment or 200 g per kilo of whitewash.

These renderings can be similar for any white base mixed with this pigment. However, differences will be possible for the use of paints more or less loaded with titanium dioxide (white pigment), which will give a final color more or less clear.

If you want to lighten a pigment, before coloring a transparent binder (linseed oil, wax, acrylic binder, caparol, flour ...), you can mix it with white tiona.

Color: coffee brown with a transparent binder. Twine with a white binder.

This pigment is 100% natural.

made in Cyprus.

History: the shadow earth probably owes its name to the Latin "umbra" (shadow) that used to fold the colors. Cyprus is the largest producer of shade land in the Mediterranean basin. We find everywhere traces of these lands. They are taken in the form of clay making them accessible pigments and cheap.

Our packaging:

We use recyclable PET jars, disposable, clean in the yellow bins.

Write a review

OMBRE DE CHYPRE CCCN

technical characteristics :

chemical name: iron oxide, clay silicates

Color index: Br7

apparent density: 758 g / l

UV resistance: very good

coloring power: very good

Write a review

9 other products in the same category:

Customers who bought this product also bought:

Menu