JAUNE INDIEN

New product

technical characteristics :
 

Chemical name: mixture of iron oxides

Color Index: Y42 - Y43 - R101

apparent density: 774 g / l

UV resistance: good

coloring power: very good

More details

1,07 €

- +

Despite the greatest care taken in color reproduction, they may differ from the actual colors of the product for technical reasons

 
More info

Use: lime, wax, paint, plaster, fresco, glaze, cement, fine arts.
This pigment is powder. For use in Artistic painting, it should be finely ground in a mortar before mixing with the binder.

Jaune indien with oil

(Jaune indien with oil)

Flaxseed oil: Dilute the powder in a little turpentine before adding it to linseed oil.
paint with water / lime paste: dilute the pigment in a little water to make it liquid before incorporating it into the paint.
lime powder / cement / plaster: incorporate the pigment directly, then mix in order to stain all of your binder.


Jaune indien with lime 

recommended dosage: The maximum dosage is 10% relative to the binder used. Above 10%, it is recommended to incorporate fixatives and adjuvants.

Photo on the left:  pigment is mixed in the badisof plus (limewash ready to use, which you can find in our decorative range) at the rate of 5% or 50 g of pigment per kilo of whitewash. Right picture: the pigment is mixed in the badisof plus 20% pigment or 200 g per kilo of whitewash.

These renderings can be similar for any white base mixed with this pigment. However, differences will be possible for the use of paints more or less loaded with titanium dioxide (white pigment), which will give a final color more or less clear.

If you want to lighten a pigment, before coloring a transparent binder (linseed oil, wax, acrylic binder, caparol, flour ...), you can mix it with white tiona.

Color: dark yellow pulling yellow ocher with a transparent binder. With a white binder, we obtain a yellow eggshell, slightly orange.

This pigment is 100% natural.

Made in France.

History: pigment preparation prepared by Société des Ocres de France. The Indian yellow has a special history: either it is derived from a paste resulting from the evaporation of the urine of cows fed with mango leaves and water, or it was extracted from mango shoots prepared in decoction ... Still, in the 19th century, this pigment was replaced by mixed pigments.

Our packaging:

We use recyclable PET jars, disposable, clean in the yellow bins.

Write a review

JAUNE INDIEN

technical characteristics :
 

Chemical name: mixture of iron oxides

Color Index: Y42 - Y43 - R101

apparent density: 774 g / l

UV resistance: good

coloring power: very good

Write a review

You can replace this product with

13 other products in the same category:

Customers who bought this product also bought:

Menu