OCRE JAUNE USA 5920

New product

technical characteristics :

Chemical name: natural and synthetic iron oxide

Color Index: Y42 - Y43

apparent density: 531 g / l

UV resistance: very good

coloring power: very good

More details

1,07 €

- +

Despite the greatest care taken in color reproduction, they may differ from the actual colors of the product for technical reasons

 
More info

Use: lime, wax, paint, plaster, fresco, glaze, cement, fine arts.
This pigment is in powder. For use in Artistic painting, it should be finely ground in a mortar before mixing with the binder.

Ocre jaune USA with oil

(Ocre jaune USA with oil)

Flaxseed oil: Dilute the powder in a little turpentine before adding it to linseed oil.
paint with water / lime paste: dilute the pigment in a little water to make it liquid before incorporating it into the paint.
lime powder / cement / plaster: incorporate the pigment directly, then mix in order to stain all of your binder.

Ocre jaune USA with lime

recommended dosage: The maximum dosage is 10% relative to the binder used. Above 10%, it is recommended to incorporate fixers and adjuvants (use lime).

Photo on the left:  pigment is mixed in the badisof plus (limewash ready to use, which you can find in our decorative range) at the rate of 5% or 50 g of pigment per kilo of whitewash. Right picture: the pigment is mixed in the badisof plus 20% pigment or 200 g per kilo of whitewash.

These renderings can be similar for any white base mixed with this pigment. However, differences will be possible for the use of paints more or less loaded with titanium dioxide (white pigment), which will give a final color more or less clear.

If you want to lighten a pigment, before coloring a transparent binder (linseed oil, wax, acrylic binder, caparol, flour ...), you can mix it with white tiona.

Color: dark ocher yellow, covering, with a transparent binder. Pale yellow lightly tingling orange with a white binder.

This pigment is 90% natural.

Made in France.

History: US yellow ocher is a reproduction made by the Ocher Company

Our packaging:

We use recyclable PET jars, disposable, clean in the yellow bins.

Write a review

OCRE JAUNE USA 5920

technical characteristics :

Chemical name: natural and synthetic iron oxide

Color Index: Y42 - Y43

apparent density: 531 g / l

UV resistance: very good

coloring power: very good

Write a review

13 other products in the same category:

Customers who bought this product also bought:

Menu