NOIR D'IVOIRE

€1.85

Noir d'Ivoire is a  pigment preparation designed by Ocres de France in 2016. True ivory black was obtained by calcination of animal bones. For a long time, and fortunately for our animal friends, it is now obtained from iron oxide. The name remained in order to signify the resemblance of the color.
This pigment is 100% natural.

Pigment made by Ocres de France

Conditionnement
Quantity

 

Legal notices

 

Politique de livraison (à modifier dans le module "Réassurance")

 

Politique retours (à modifier dans le module "Réassurance")

Use : lime, wax, paint, plaster, fresco, glaze, cement, fine arts, flour painting.
This pigment is in powder. For use in artistic painting, it should be ground finely in a mortar before mixing it with the binder.




Noir d'Ivoire mixed with linseed oil

Linseed oil : dissolve the powder in a little bit of turpentine before adding it to the linseed oil.
Water-based paint/fatty lime : dilute the pigment in some water to make it liquid before incorporating it into the paint.
Lime powder/cement/plaster : directly incorporate the pigment (up to 10% based on the weight of the binder), then mix in order to stain all of your binder.

Maximum dosage : The maximum dosage is 10% compared to the binder used. Above 10% it is recommended to incorporate fixators and adjuvant (lime use).



Photo on the left : the pigment is mixed in the badisof plus (limewash ready to use which you can find in our deco range) at the rate of 5% so 50 g of pigment per kilo of whitewash.
Photo on the right : the pigment is mixed in the badisof plus at the rate of 20% so 200 g per kilo of whitewash.


These renderings can be similar for any white base mixed with this pigment. However, differences could be possible for the use of paints more or less loaded with titanium dioxide (white pigment), which will give a final color more or less light. If you want to lighten a pigment, before coloring a transparent binder (linseed oil, wax, acryling binder, caparol, flour, etc), you can mix it with blanc Tiona (= white Tiona). 


Color : dark gray with a clear binder. With a white binder, ivory black gives us a beautiful anthracite.

This pigment is 100% natural.


Made in France.


History
: the real black Ivory was obtained by the calcination of animals bones. Since a long time and fortunately for our friends the animals, it is now obtained from iron oxides. The name has remained to signify the ressemblance of color.  



_____________________


Our packaging :

We use recyclable PET jars, to throw away, cleaned, in the yellow bins ; and glass jar that you can clean and sterilize for other uses even for food storage.

RCP04OXSNI1

Data sheet

Origin
France
Chemical name
Natural iron oxide
Color Index
Bk11
Bulk density
735 g/l
UV resistance
Good
Colouring power
Bon

Specific References