Marron glaise is a pigment preparation created by Ocres de France in 1998, characterized by a great fineness of material.
This is a synthetic pigment without any danger for health or the environment. It is composed of 99% natural ingredients.
Pigment made by Ocres de France
Uses : lime paint, lime coating, wax, paint, plaster, fresco, glaze, cement, fine arts.
This pigment is in powder. For use in artistic painting, it should be ground finely in a mortar before mixing it with the binder.
Marron glaise mixed with linseed oil
Linseed oil : dissolve the powder in a little bit of turpentine before adding it to the linseed oil.
Water-based paint/fatty lime : dilute the pigment in some water to make it liquid before incorporating it into the paint.
Lime powder/cement/plaster : directly incorporate the pigment (up to 10% based on the weight of the binder), then mix in order to stain all of your binder.
Maximum dosage : The maximum dosage is 10% compared to the binder used. Above 10% it is recommended to incorporate fixators and adjuvant (lime use).
Photo on the left : the pigment is mixed in the badisof plus (limewash ready to use which you can find in our deco range) at the rate of 5% so 50 g of pigment per kilo of whitewash.
Photo on the right : the pigment is mixed in the badisof plus at the rate of 20% so 200 g per kilo of whitewash.
These renderings can be similar for any white base mixed with this pigment. However, differences could be possible for the use of paints more or less loaded with titanium dioxide (white pigment), which will give a final color more or less light. If you want to lighten a pigment, before coloring a transparent binder (linseed oil, wax, acryling binder, caparol, flour, etc), you can mix it with blanc Tiona (= white Tiona).
Color : light brown pulling torward rose with a transparent binder. Very light pinkish brown with a white binder.
This pigment is synthetic but composed of 99% of natural ingredients.
Made in France.
History : pigment preparation created by Ocres de France in 1998, characterized by a great fineness of material.
Our packaging :
We use recyclable PET jars, to throw away, cleaned, in the yellow bins ; and glass jar that you can clean and sterilize for other uses even for food storage.
- Chemical name
- Mixture of iron oxides
- Color Index
- Bulk density
- 653 g/l
- UV resistance
- Very good
- Colouring power