BRUN 686

Uses : lime paint, lime coating, wax, paint, plaster, fresco, glaze, cement, fine arts.
This pigment is in powder. For use in artistic painting, it should be ground finely in a mortar before mixing it with the binder.

Brun 686 mixed with linseed oil

Linseed oil : dissolve the powder in a little bit of turpentine before adding it to the linseed oil.
Water-based paint/fatty lime : dilute the pigment in some water to make it liquid before incorporating it into the paint.
Lime powder/cement/plaster : directly incorporate the pigment (up to 10% based on the weight of the binder), then mix in order to stain all of your binder.

Maximum dosage : The maximum dosage is 10% compared to the binder used. Above 10% it is recommended to incorporate fixators and adjuvant (lime use).

Results of Brun 686 mixtures according to our packaging, in our limewash Badisof naturel

These renderings can be similar for any white base mixed with this pigment. However, differences could be possible depending on the binder used, the support and/or the application technique used, which will give a final color more or less light. The mixing possibilities are endless, while respecting the maximum dosage.

If you want to lighten a pigment, before coloring a transparent binder (linseed oil, wax, acryling binder, caparol, flour, etc), you can mix it with blanc Tiona (= white Tiona).

Color : very dark warm brown with a transparent binder. Deep brown pulling toward burgundy with a white binder.

This pigment is 100% synthetic without any danger for the health or the environment.

Made in Germany.

_____________________

Our packaging :

We use recyclable PET jars, to throw away, cleaned, in the yellow bins ; and glass jar that you can clean and sterilize for other uses even for food storage.